BXMA-A03(SCMS-DWB)

SCMS-DWB™ Double seal Wet(liquid barrier) and integral load carrying BearingSCMS-DDB™ Double seal Dry(contacting – gas barrier) and integral load carrying BearingThe seal is offered with the following features:
BXMB-A05(BSIV)

Single Bellows The BSIV™ range of single cartridge mechanical seals has been designed as a value-for-money, high-performance sealing solution for general applications. Inventoried in SHS bellows materials. Other material combinations are available, including a full, solid alloy 276 bellows and gland arrangement in all ANSI sizes. Features:
BXMA-K07(EKATO ESD 64H)

*Product description Single cartridge mechanical seal for mixer application ,replacemente Germany EKATO mixer accessory products. *Apply to the host EKATO Company *Product features Single cartridge seal Pusher Multiple springs seal Independent of direction of rotation […]
BXMA-K06(EKATO ESD 34G)

*Product description Single cartridge mechanical seal for mixer application ,replacemente Germany EKATO mixer accessory products. *Apply to the host EKATO Company *Product features Single cartridge seal Pusher Multiple springs seal Independent of direction of rotation […]
BXMA-K05(EKATO ESD 42)

*Product description Single cartridge mechanical seal for mixer application ,replacemente Germany EKATO mixer accessory products. *Apply to the host EKATO Company *Product features Single cartridge seal Pusher Multiple springs seal Independent of direction of rotation […]
BXMA-K04(MUT 60)

*Product description: TDSL series mechanical seal is supporting the MUT (Germany) mixer is special, the mechanical seal ring, quiet ring, spring, auxiliary sealing ring, shaft sleeve, bearing an aggregation of main parts assembled together, is mainly used in coal-fired flue gas desulfurization device on agitator absorption tower in the side, also […]
BXMA-K03(SHARPE 22SV25M)

*Product description Single cartridge mechanical seal for mixer, agitator and reactor application, replacement United States Sharp agitator accessory products. *Apply to the host SHARPE Company *Product features Single cartridge seal Pusher Multiple springs seal Independent of […]
BXMA-K02(Lightnin ECL)

* The product description: the product is sealed with no clogging centrifugal pump, and the structure form is a single end face structure of the assembly type. * Applicable host: Lightnen * Product features: Single end face set, static balance type. Multiple springs, free rotation. Horizontal installation, clamping […]
BXMA-K01(Lightnin SVM)

BXMB-J02(609)

High-temperature, Rotating Edge-welded Metal Bellows Seal The Type 609 is a high-temperature (to 425°C/800°F) rotating seal head assembly that incorporates all of the rugged features of the Type 604, but is intended for those demanding applications where a dependable, high-strength, rotating seal is preferred. A narrow cross-section design enables the Type 609 to fit in […]
BXMB-J01(604)

High-temperature, Stationary Edge-welded Metal Bellows Seal The Type 604 is a high-temperature, general-purpose, stationary edge-welded metal bellows assembly for applications to 425C/800F. Available in either AM350 or Alloy 718, its high-strength design provides maximum reliability. The stationary bellows design accommodates high shaft-to-seal-chamber misalignment. Unlike rotating seals that must flex on every revolution to accommodate shaft-to-seal-chamber […]
BXMA-B09(SeccoMix II)
Features Advantages Operating range Shaft diameter:d1 = 25 … 220 mm (0,98″ … 8,66″)Pressure: p1 = vacuum … 6 bar (87 PSI)Temperature:t1 = -20 °C … +200 (250*) °C(-4 °F … 392 (482*) °F)Sliding velocity: vg = 0 … 2 m/s (0 … 6 ft/s)Axial movement: ±1.5 mmRadial movement: ±1.5 mm For applications beyond this […]