Features
- For top entry drives, on request for side and bottom entry drives
- For glass-lined vessels
- Dry-running
- Modular and flexible design
- Compensation of shaft deflection by patented technology
- Independent of direction of rotation
- Cartridge unit
Advantages
- Available as a ready-to-mount cartridge for quick and easy installation
- Ready-to-fit and factory-tested units
- Safe and environmentally compatible technology
- The glass-lined flange does not have to be replaced – an adaptation is possible
- No monitoring necessary
- No cost-intensive supply system necessary
- Low maintenance requirements
- No additional roller bearing necessary, but optionally available
- Sealing element made of bright chemically highly resistant PTFE compound
- ATEX certification available on request
- Customized adjustments possible
Operating range
Shaft diameter (on stock): d1 = 40 … 125 mm (1.57″ … 4.92″)
Special shaft diameters between 25 mm and 200 mm possible (0.98″ … 7.87″)
Pressure: p1 = vacuum … 6 bar (87 PSI)
Temperature: -30 °C … +200 °C (-22 °F … +392 °F)
Sliding velocity: vg = 0 … 2 m/s (0 … 6 ft/s)
Axial movement: ±3.0 mm
Radial movement: 1.0 mm (up to 3 mm on request)
For applications beyond this range, please inquire.
! It should be noted that the extremal values of each operating parameter cannot be applied at the same time because of their interaction.
Materials
Lip sealing element: bright chemically highly resistant PTFE-compound
Secondary seals: FKM (V)
Adapter: AL-Oxid
Metallic parts: 316L /1.4404